Arkansas State Seal – Leather Stamp (Acrylic)

Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.

Arkansas State Seal – Precision Leather Stamp

Showcase your Louisiana pride with our incredibly detailed Arkansas State Seal leather stamp. Designed for clarity and depth, this stamp captures every iconic element of the official seal.

Whether you are crafting custom coasters, belts, or commemorative wallets, this stamp provides a professional, high-end emboss every time.

Product Features

• Intricate Detail: Engineered to maintain crisp lines even on textured leather surfaces.

• Professional Grade: Built for durability and consistent results under a press or mallet.

• Versatile Application: Perfect for veg-tan leather projects, woodworking, or clay.

Available Sizes

Choose the perfect scale for your project:

• 2″ Diameter: Ideal for key fobs, small wallets, or accents on larger bags.

• 3.5″ Diameter: The perfect size for coasters, notebook covers, or centerpieces on saddlebags.

• 6″ Diameter: The perfect size for padfolios, portfolios, framed leather goods.

Pro Tip: For the best results, ensure your leather is properly cased (moistened) before stamping to achieve that deep, rich burnished look shown in the photos.

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather@Gmail.com. After I look at the image, I will let you know if I can produce it.

Want to see how to prep your leather? Watch my video on proper casing here:  https://www.youtube.com/pastorbobleather/

Here is a category full of USA Themed Stamps