Celtic Trinity Knot Dragon Acrylic Stamp for Leathercraft

Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.

Product Description

Unleash the power of mythical legend on your next leatherworking project with this stunning Celtic Dragon Acrylic Stamp. Precisely engineered from premium 1/4″ heavy-duty acrylic, this stamp effortlessly transfers deep, crisp impressions into your veg-tanned leather. The design beautifully pairs a majestic, sweeping dragon with a traditional Celtic trinity knot (triquetra), creating a timeless focal point that is perfect for coasters, bag flaps, journal covers, or custom armor pieces.

Because we know every project demands a different scale, we offer this stamp in ultra-versatile sizing options. You can choose the perfect fit for your workbench, starting at a compact 1.1 inches and scaling all the way up to a bold 6 inches, available in convenient 1-inch increments.

Why Choose Our Acrylic Stamps?

• Crystal Clear Placement: Since the stamp is completely transparent, you can precisely align your design on the leather blank before applying pressure.

• Deep, Clean Impressions: The 1/4″ thickness provides excellent depth, ensuring that both the delicate curves of the dragon’s wings and the interlocking paths of the Celtic knot crisp up beautifully.

• Versatile Application: This tool handles your workshop needs with ease. Consequently, you can press it using a clicker press, an arbor press, or by carefully utilizing a c-clamp.

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather@Gmail.com. After I look at the image, I will let you know if I can produce it.

Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]

Here is a category full of Stamps: