Masonic Cross and Crown Leather Stamp – Knights of the Templar (Acrylic)

The Masonic Cross and Crown – Knights of the Templar leather stamp is a laser-engraved acrylic tool designed to create bold, clean impressions on properly cased leather. Each stamp is locally made in Southwest Missouri and built for leatherworkers who value sharp detail, strong symbolism, and consistent results.

This classic design represents the Cross and Crown associated with the Knights of the Templar. It works well for belts, hat patches, straps, holsters, bags, and other Masonic or heritage-inspired leather projects. The stamp is available in three size options: 1.5″, 2″, and 3″, allowing you to choose the best fit for your specific project.

Product Overview

This listing includes the Masonic Cross and Crown acrylic stamp only. Each stamp is precision laser engraved to produce deep, crisp impressions when pressed into evenly cased leather. The acrylic construction is durable, easy to clean, and suitable for repeated shop use.

Available Sizes

• 1.5-inch
• 2-inch
• 3-inch

Key Features

• Laser-engraved Masonic Cross and Crown design
• Available in 1.5″, 2″, and 3″ sizes
• Creates deep, crisp impressions on cased leather
• Durable acrylic construction
• Easy to clean, scrub, and sanitize
• Ideal for hat patches, belts, straps, and custom leather goods
• Locally made in Southwest Missouri

Important Use Note

This stamp is designed for use with an arbor press or a vise using slow, even pressure. Do not strike with a hammer. Hammer use will damage the acrylic and void the guarantee.

Arbor Press Instructions

1. Place evenly cased leather on a solid surface under the press anvil.
2. Set the stamp on top of the leather.
3. Place a flat block or plate (wood or metal) on top of the stamp.
4. Apply steady downward pressure and hold for 15–20 seconds.
5. Check the impression and repeat if additional depth is needed.

Vise Instructions

1. Place the cased leather and stamp between two flat boards or plates.
2. Insert into a vise and tighten firmly.
3. Hold pressure for 15–20 seconds.
4. Release, inspect the imprint, and repeat if necessary.

Best Results: Casing Leather

Moisten the entire piece of leather evenly with a damp sponge before stamping. Even casing helps prevent water spots and produces a clean, uniform impression. Using a pressing pad or scrap leather on top of the stamp helps distribute pressure evenly.

Cleaning & Care

After use, rinse or lightly scrub the engraved face and dry completely before storage. Avoid impact tools to protect the fine engraving detail and extend the life of the stamp.

Lifetime Guarantee

This stamp includes a lifetime guarantee. If it no longer produces an acceptable impression under normal press use, return it for a replacement. Hammer use voids the guarantee.

Custom Logo Options

Custom acrylic stamps are available. Send a clean black-and-white version of your artwork to the shop email for review. Once approved, custom stamps can be produced to meet your project needs.

A meaningful and timeless design built for leatherworkers who want strong symbolism, clean impressions, and dependable tools.

Looking for a different kind? See more Masonic Embossing Stamps here

We pride ourselves on quality! See what our customers think.