Custom Leather Stamp for Logos & Maker’s Marks | Acrylic

Custom stamps are $15 per inch on the longest side.  Round up to the nearest 1/2″.  A one-time artwork fee of $25 is included in the price.

Custom Deep-Etch Acrylic Stamp for Leather Tooling

Elevate your leathercraft with a custom-branded mark. Our stamps are engineered from high-density, industrial-grade acrylic, designed to deliver crisp, professional impressions in vegetable-tanned leather.

Product Features:

• Crystal Clear Precision: Made from transparent acrylic, allowing you to see exactly where you are placing your mark for perfect alignment every time.

• Deep-Relief Etching: We utilize a deep-etching process that ensures a clean “pop” in the leather without the background of the stamp interfering with the grain.

• Durability: While lightweight, our acrylic is shatter-resistant and built to withstand the pressure of a shop press or a balanced mallet strike (when used with a load-spreader).

• Versatile Application: Perfect for branding logos, maker’s marks, or intricate decorative patterns onto wallets, belts, bags, and journals.

Specifications:

• Material: 1/4″ (6mm) or 1/2″ (12mm) Extra-Thick Premium Acrylic (Select size below).

• Usage: Best results achieved on dampened vegetable-tanned leather using an arbor press or hydraulic press.

• Customization: Fully tailored to your dimensions.

Ordering Requirement: If you do not already have a production-ready vector file on file with us, please ensure you add the Custom Artwork & Digital Design Fee. We cannot begin fabrication until the artwork has been optimized and approved.

We have many specialty stamps already created you are welcome to review as well.  Click Here

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.