Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.
Create striking, professional-grade impressions with this eagle bust over AR-15 acrylic stamp. First, the powerful eagle design commands attention; meanwhile, the rifle detail reinforces a bold, patriotic aesthetic. Consequently, you achieve a clean, high-contrast mark that stands out on veg-tan leather.
Next, the precision-cut acrylic face ensures sharp line transfer; therefore, every impression remains consistent from the first strike to the last. In addition, the balanced composition helps you align the stamp quickly, so you reduce guesswork and maintain repeatable placement across batches. As a result, you increase efficiency while maintaining a refined, handcrafted look.
Furthermore, this stamp adapts easily to a wide range of projects. For example, you can enhance holsters, belts, patches, sheaths, and custom panels; likewise, you can create branded pieces that showcase a bold identity. Because the stamp performs well with both hand tools and arbor presses, you can match your workflow without sacrificing detail.
Finally, you can select from multiple sizes—1.1″, 2″, 3″, 4″, 5″, and 6″ heights—so you scale your design for small accents or large focal points. Therefore, whether you craft one-of-a-kind items or produce consistent product lines, this stamp delivers reliable, eye-catching results every time.
***SPECIAL NOTE: How to Use Your Stamp***
Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.
You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.
Arbor Press Instructions:
- Place your cased leather on a strong, solid surface directly under the press’s anvil.
- Put the stamp on top of the cased leather.
- Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
- Apply slow, downward pressure with the press and hold it for 15-20 seconds.
- Check your result. Repeat as needed to get the perfect depth.
Vise Instructions:
- Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
- Place this setup inside your vise.
- Tighten the vise slowly and hold the pressure for 15-20 seconds.
- Release the vise and check how deep the imprint is. Repeat as necessary.
This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.
Custom Logos Available:
I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather@Gmail.com. After I look at the image, I will let you know if I can produce it.
Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]
Here is a category full of Stamps:
michael pawlik –