Girl and Her Horse Acrylic Stamp – Country Western

Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.

Show off your western style with our country themed Acrylic Stamp!

First, we make each stamp using durable 1/4″ thick acrylic so it can handle repeated use. Because the image is 1.1″ tall, it fits right in the center of 1.5″ leather belts. Consequently, you can create a rugged, high-quality look for your customers or yourself.

In addition to belts, this stamp works perfectly for smaller projects. For example, you can stamp the design onto wallets, clutches, or even leather hair clips. Since the material is clear, you can see exactly where the horse head lands on your project. Therefore, you will never have to worry about crooked or messy designs.

Next, prepare your leather by casing it with a little water. After that, press the stamp firmly to reveal the beautiful details of the horse. Because the edges are so sharp, the design stands out clearly on any piece of leather. Finally, head over to www.pastorbobleather.com to add this essential tool to your collection!

Engineered for Crafting Accuracy

Precision matters in leatherwork; therefore, we manufactured this tool from crystal-clear 1/4″ thick acrylic. This transparency allows you to see your leather through the stamp so you can align the image perfectly with your stitch lines or previous impressions. Additionally, the sturdy material handles the pressure of a shop press or a mallet without flexing or warping. The default size is 1.1″ tall so that it fits perfectly on a belt, leaving room for stitching. Larger sizes are also available for notebook covers, Bibles, etc. Whether you are working on a small strap or a large journal, this tool scales to your specific needs.

Ease of Use for Every Skill Level

Using this stamp is remarkably simple. First, dampen your vegetable-tanned leather slightly to prepare the fibers for embossing. Next, place the clear acrylic block exactly where you want the design to appear. Finally, apply even pressure using your preferred method to create a deep, permanent impression. Since the acrylic resists moisture, you can wipe it clean in seconds after your project is complete. Moreover, the durable construction ensures this stamp remains a staple in your workshop for many years.

Versatile Application for DIY Projects

While we designed this primarily for leather, its utility extends much further into the crafting world. For instance, you can use it to emboss clay, thick cardstock, or even artisan soap. Additionally, the floral motif complements everything from rugged western belts to elegant wedding albums. If you want to elevate your brand’s aesthetic, this stamp provides a consistent, professional finish every time. Specifically, it saves you hours of manual labor while maintaining a high-end, artisan feel that customers love.

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather@Gmail.com. After I look at the image, I will let you know if I can produce it.

Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]

Here is a category full of Country Western Themed Stamps