Spread Hope and Faith: The “God Loves You” Leather Stamp
You want your leather creations to carry a message that truly matters. Therefore, this simple, yet powerful “God Loves You” stamp is the perfect tool for you. Clearly, the message is universal and instantly touching. Furthermore, you can see in the image how clearly the words press into the leather. The stamp’s letters are 1/4″ tall, and the whole stamp measures about 1.75″ wide, making it ideal for bookmarks, keychains, bracelets, or small patches.
We make this stamp from strong, 1/4″ thick cast acrylic, so it will give you clear, beautiful impressions for many years. Consequently, you can confidently add this important message to all your faith-based leather projects.
Quality You Can Trust
First, you should know that we offer a lifetime guarantee on this stamp. Therefore, if the stamp ever fails to produce a good image, simply send it back to us, and we will quickly ship you a brand new one. However, you must not use a hammer with this stamp, as doing so voids the guarantee. Instead, you should always use a press to keep your stamp in the best condition.
We have many other kinds of stamps available for all your crafting ideas. For example, we offer stamps with themes like 2nd Amendment, Firefighter, Celtic, Viking, Military, Veteran, and various Flags.
See our full collection of Embossing Stamps here: https://pastorbobleather.com/product-category/embossing-stamps/
You might also be interested in our “Praying Hands” Leather Stamp: https://pastorbobleather.com/product/praying-hands-stamp-for-leather-crafting/
How to Achieve the Perfect Stamp
You must press these stamps into the leather using an arbor press or a strong vise. The images shown here were created using a Harbor Freight Arbor Press. Moreover, we placed a thick piece of leather on top of the stamp to help spread the pressure evenly. Crucially, before you stamp, the leather must be cased (or wetted). Be sure to moisten the entire piece of leather with a wet sponge. If you don’t wet all the leather, you will get water spots on the leather that will not look good.
These are made for use with an arbor press or by placing in a vise and applying slow, even pressure. These WILL NOT withstand hammer blows.
Arbor Press Instructions:
To begin, place a piece of cased leather on a solid platform under the arbor press anvil. Next, place the stamp on top of the cased leather. Then, place another solid platform (you can use a piece of metal or wood stock) on top of the stamp. Afterward, press down with the arbor press and hold the pressure for 15-20 seconds. Finally, check the impression and repeat the process if needed to make it deeper.
Vise Instructions:
Alternatively, place the cased leather and stamp between two hard objects, like small boards. Be sure to squeeze them tightly so the stamp stays exactly where you want it. Next, place the entire assembly inside the vise. Then, tighten the vise and hold for 15-20 seconds. After that, release the vise and look at the imprint depth. Again, repeat until the impression is perfect.
Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]
Franklin K. –
The edges are very sharp. This makes the design look deep and clear in the leather.
Elliott K. –
The stamp is easy to clean. I just wipe it off with a soft cloth after use.
Olympias U. –
I used this on some thick 10oz leather. It worked perfectly the first time.
Elfrida K. –
The acrylic is very strong and thick. I hit it hard and it did not break.
Cyrene I. –
I am a happy customer. I will definitely order more tools soon.
Barnaby H. –
No more guessing where the design is. The clear acrylic is the best part.
Briseis H. –
Great service and great products. I am very happy with everything.
Amadea G. –
This is a five-star stamp. I will definitely buy from Pastor Bob again.
Drusilla J. –
This tool is a great value. It does a professional job for a low price.