Lone Star Texas Leather Maker Stamp US Flag

Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.

Clear Design for Better Crafting

First, this stamp uses 1/4″ thick clear acrylic. Because the material is see-through, you can line up your design perfectly. Therefore, you will never ruin a piece of leather with a crooked mark. Additionally, the thick acrylic stays strong even when you apply pressure.

Easy to Use

Next, you can use this stamp with a simple press or a mallet. First, dampen your leather slightly. Then, place the stamp exactly where you want it. After that, apply even pressure to create a deep impression. Finally, lift the stamp to see your beautiful Texas map. Since it is so easy, even beginners can make professional-looking gear.

Durable and Sharp

Furthermore, the edges of this stamp are very sharp. As a result, the lines in the leather look crisp and clean. Also, the star in the center of the Texas map stands out clearly. Because we make these to last, you can use this stamp on hundreds of projects.

Perfect for Your Shop

Lastly, this is a great tool for any leatherworker. Whether you make wallets or rifle slings, this Texas design adds a personal touch. Specifically, customers love the classic Lone Star look. So, add this to your toolkit today to save time and improve your work.

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather@Gmail.com. After I look at the image, I will let you know if I can produce it.

Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]

Here is a category full of USA Themed Stamps