Sunflower & Butterflies Acrylic Leather Stamp

Notice: All 4″ stamps and larger will be made using 1/2″ thick acrylic. Smaller sizes will continue to be produced using 1/4″ acrylic.

Make your leather goods stand out with our stunning Sunflower Acrylic Stamp!

First, we craft each stamp from high-quality 1/4″ thick acrylic to ensure it lasts through many projects. Because the sunflower image measures 1.1″ tall, it fits perfectly on standard 1.5″ belts. Consequently, you can add a professional, floral look to your work without any struggle.  Larger sizes are also available for notebook covers, Bibles, etc.

In addition to belts, this stamp works wonders on smaller items. For example, you can use it to decorate wallets, clutches, or even leather hair clips. Since the acrylic is clear, you can see exactly where you are placing the design. Therefore, you will get perfect placement on your cased leather every single time.

Next, simply prepare your leather by casing it. After that, press the stamp firmly to reveal a crisp, detailed sunflower. Because the design is so clean, your finished pieces will look better than ever. Finally, elevate your craft today with a tool that combines beauty and precision!

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather (AT) Gmail dot com. After I look at the image, I will let you know if I can produce it.

Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]

Here is a category full of Christian Themed Stamps: