Royal Flush Playing Card Leather Stamp – Deep Crisp Impression Tool for Belts, Wallets & Poker Gear

Product Description:

Hit the Jackpot with the Royal Flush Leather Stamp!

You can easily turn a simple piece of leather into a show-stopping item with this awesome Royal Flush stamp. Clearly, this design is the perfect way to finish any item for a poker player, a card game lover, or anyone who just loves a winning hand.  The 1.1″ stamp fits perfectly on a 1.5″ leather belt, leaving plenty of room for stitching above and below it.  The 1.1″ stamp is approximately 2.75″ long.

Furthermore, this 1/4-inch thick cast acrylic tool creates a deep, crisp impression in your leather. You must use it on cased (wet) leather to get the best results. Consequently, the finished product looks clean, professional, and amazing, just like the image you see on the belt!

Showcase Your Skills with This Winning Design:

• Belts: Stamp the tip or back of a belt for a fantastic custom look.
• Wallets: Impress the design onto a wallet panel for a cool, unique pattern.
• Keychains: Make a small, memorable gift for your card-playing friends.
• Coasters: Create a great set of game-night coasters.
• Custom Poker Chip Cases: Add a fitting design to cases for poker chips or dice.

Options available:

• Firefighter Theme
• Gunslinger Theme
• Traditional Spade symbol

***SPECIAL NOTE: How to Use Your Stamp***

Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee.

You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure.

Arbor Press Instructions:

1. Place your cased leather on a strong, solid surface directly under the press’s anvil.
2. Put the stamp on top of the cased leather.
3. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly.
4. Apply slow, downward pressure with the press and hold it for 15-20 seconds.
5. Check your result. Repeat as needed to get the perfect depth.

Vise Instructions:

1. Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move.
2. Place this setup inside your vise.
3. Tighten the vise slowly and hold the pressure for 15-20 seconds.
4. Release the vise and check how deep the imprint is. Repeat as necessary.

This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer.

Custom Logos Available:

I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to PastorBobLeather (AT) Gmail dot com. After I look at the image, I will let you know if I can produce it.

Watch this video to see how to press the stamp: